Why does my Denon receiver keep cutting out?

Power Problems Denon receivers are equipped with a microprocessor that initializes the audio and video settings when the unit is powered on. Occasionally, you may find the component cuts off when it is turned on because the protection circuit is confused by the microprocessor, so the Denon shuts off.

Why does my Denon receiver have no sound?

These reasonings generally fall into three categories: Your Denon Receiver has not been configured correctly. Your Surround Speakers have not been connected to your receiver correctly. There may be a hardware fault with either your speakers or receiver.

How do I fix the sound on my Denon receiver?

No sound comes out

1. Check the connections for all devices. link.
2. Check that speaker cables are properly connected.
3. Securely tighten the speaker terminals.
4. Check that a proper input source is selected.
5. Adjust the volume.
6. Cancel the mute mode.
7. Check the digital audio input connector setting.

Why does my surround sound cut out?

Verify the speaker wires are properly connected to both the speakers and the A/V receiver. Turn off any nearby electronic devices that may be interfering with the speaker sound. Try replacing the speaker wires. If possible, connect a different set of speakers.

Does Denon support HDMI CEC?

Both the Denon and the Samsung support HDMI-CEC.

What is HDMI Control on Denon receiver?

HDMI CEC (Consumer Electronics Control) also called HDMI Control, is a feature on some model AV receivers and DVD players that allows for one button control of supported system functions. This feature may also be available on other compatible devices such as TV displays.

What does eARC mean?

Enhanced Audio Return Channel
Most TVs compress audio signals in advance before going through HDMI cables. The eARC (Enhanced Audio Return Channel) enables you to transmit the original full resolution audio signal through an HDMI cable and reproduce the best sound without compromise.

Do Denon AVRs have HDMI issues?

I’ve had 5 or 6 Denon’s since 2009 and all of them work with no HDMI issues. I’ve given a couple away but have never had anyone complain about them. You might have an isolated case but you do have a 3 year warranty in case it is defective. One HDMI input port (port 5/game) on my Denon AVR-X1300W stopped working.

Why does my TV have an audio output from the receiver?

This is commonly used with newer TVs when streaming material from an Internet source. (ie: Netflix) As the TV is receiving the data from it’s own Internet connection, it should allow for the source material’s audio track to be output using the single HDMI cable connection between the TV and the receiver.

Does Denon have a history of bad HDMI boards?

If Denon had a long history of Hdmi boards or ports (or anything) going out with regularity, there would be a ground swell of examples and dozens of threads documenting the issues (along with a call to arms). You experienced a bad board or port….it’s pretty simple, it needs to be fixed.