What is y 1564 testing?

What is y 1564 testing?

Y. 1564 – Ethernet Service Activation Test (or performance test methodology) is a testing procedure which tests service turn-up, installation, and troubleshooting of Ethernet-based services. This test methodology was created to have a standard way of measuring Ethernet-based services in the industry.

What is rfc2544?

RFC 2544 is the Industry-standard service activation test for single-service Ethernet and IP (i.e. “pipe test”). The test measures key performance indicators and bandwidth profile such as: throughput, latency, packet Jitter, frame loss, and committed burst size (CBS).

What is rfc6349?

RFC 6349 is the new transmission control protocol (TCP) throughput test methodology that Viavi co-authored along with representatives from Bell Canada and Deutsche Telecom.

What is service Activation test?

Service Activation Testing is the process of executing a collection of test procedures to be applied to a given traffic entity (e.g., EVC, OVC, etc.) in order to collect behavioral information about the traffic and compare this with predefined expectations.

Is RFC testing intrusive?

The Internet Engineering Task Force created RFC 2544 in 1999, but it is an intrusive test designed for testing new network equipment, not Ethernet services with Multi-CoS. Each RFC 2544 test is performed independently and in a serial process, so testing can take hours.

What is rfc2889?

This RFC primarily deals with devices which switch frames at the Medium Access Control (MAC) layer. It provides a methodology for benchmarking switching devices, forwarding performance, congestion control, latency, address handling and filtering.

What is DUT in networking?

A device under test (DUT) is a device that is tested to determine performance and proficiency. A DUT is checked for defects to make sure the device is working.

What does RFC test mean?

Request for comment
Request for comment (RFC) 2544 is a benchmarking methodology created in 1999 for testing and measuring the performance of network devices. These tests are considered out-of-service, meaning the real network traffic must be stopped so that the tester can generate traffic with specific characteristics.

What are Rfcs in networking?

In the computer network engineering and design realm, a Request for Comments (RFC) is a memorandum published by the Internet Engineering Task Force (IETF) describing methods, behaviors, research, or innovations applicable to the working of the Internet, along with Internet-connected systems.

What is DUT LTE?

A device under test (DUT), also known as equipment under test (EUT) and unit under test (UUT), is a manufactured product undergoing testing, either at first manufacture or later during its life cycle as part of ongoing functional testing and calibration checks.

What is DUT in calibration?

Calibration is the act of comparing a device under test (DUT) of an unknown value with a reference standard of a known value. A person typically performs a calibration to determine the error or verify the accuracy of the DUT’s unknown value.

What are RFCs in networking?

What is ITU-T y1564?

ITU-T Y.1564 is an Ethernet service activation test methodology, which is the new ITU-T standard for turning up, installing and troubleshooting Ethernet-based services. It is the only standard test methodology that allows for complete validation of Ethernet service-level agreements (SLAs) in a single test.

What is the difference between ITU-T 1564 and expertsam?

ITU-T Y.1564 is a standard Ethernet service activation test methodology that allows for complete validation of Ethernet service-level agreements (SLAs) in a single test. GL’s ExpertSAM™ is an optional application with GL’s PacketExpert™, Ethernet / IP Tester that comes in 2 platform variants –

What is iconverter NID 1564?

Finally Y.1564 provides testing of system policers and the ability to handle bursts of data. iConverter NIDs conform to MEF 23.1 Class of Service Performance Objectives that define specific performance metrics for over 20 application types, including Mobile Backhaul, VoIP, Video Conferencing, Financial Services and Cloud Services.

What is y1564 service activation testing?

Y.1564 Service Activation Testing is a standard specifically designed for Carrier Ethernet and tests the Y.1731 metrics of Ethernet Virtual Connection (EVC) or Classes of Service (CoS) flows. Y.1564 testing is non-intrusive, and can test multiple flow simultaneously.