What is the edge around a door called?

What Is an Architrave? The architrave (sometimes also referred to as jamb casing) is part of the door casing and refers to the decorative trim that sits around the door frame. It is purchased separately to the frame, which is what the wood around the door frame is called.

What is a kerf door frame?

A kerfed door jamb is one where a kerf (slot) is cut into the door jamb for the purpose of allowing a drywall corner bead to be wrapped directly into the jamb. A kerfed door jamb can provide a much cleaner, minimalist look, which is appropriate in modern and contemporary architecture.

What is kerf frame?

CURRISeal is an integrally gasketed, one piece hollow metal door frame. Gaskets installed in the integral kerf significantly reduce air flow between the door and the frame.

What is a jamb stop?

Doorstop: Thin strips of wood called stops are mounted along the length of the jambs and head. The purpose is to stop the door so that it can’t be ripped off its hinges. If the jambs are rebated, which means they have a notch taken out of them, the door will stop without the need for separate strips of wood.

What are door casings?

What is casing? Quite simply, it’s a moulding profile which frames (or trims) a door or window. Casing is functional as well as decorative. The main purpose of casing is to surround all doors and windows, covering any space or gap left between the drywall and frame.

What is a kerf edge?

Kerf is defined as the width of material that is removed by a cutting process. The “cut angle” on the edge of the part makes measuring the kerf width sorta tricky, but for consistency, the word “kerf” should only be used when talking about the actual cut width.

What is door buck?

A door buck is a jig that holds the door securely on edge and prevents it from moving while you are planing, routing for hinge mortises or lock installation preparation. “Buck” was an 1800’s term for sawhorse. So a door buck is basically a door sawhorse.

What is the difference between a stile and a rail?

Stile and rail doors are basically doors that come with panels; in other words, they’re not just flat wood doors. The stile refers to the vertical pieces on the door, while the rail is the horizontal pieces. The panels of the door fit in between the stiles and rails.

Why is it called a stile?

The etymology of stile is not known, but — according to the online Oxford English Dictionary — possibly the term comes from Dutch stijl, “pillar, prop, doorpost”. Since the 17th-century, in Britain, “stile” is generally used generally for the parts of furniture and other wooden fixtures noted above.

What is Usu door edge trim?

U-Shaped door edge trim slides onto edges; is flexible and guards against nicks and chips on edges of vehicle doors. For all uses to cover or hide all types of metal, wood and plastic edges. Install Instructions not available. 1/2 inch L Shaped Door Edge and Wheel Lip Molding – Black or Chrome Sold by the Roll.

What is edge trim on a car door?

L Shape door edge trim allows edge protection on thicker surfaces. 3M adhesive on wide (facing) side of molding. Flexible vinyl trim guards against nicks and chips on edges of vehicle doors.

What is U-shaped door trim?

U-Shaped door edge trim slides onto edges; is flexible and guards against nicks and chips on edges of vehicle doors. For all uses to cover or hide all types of metal, wood and plastic edges.

Why choose custom door producers for exterior front door trim?

Custom door producers have utilized trim work to decorate homes and public structures for many years. Indeed, trim work also furnishes your living space with a completed look. In addition, you can use exterior front door trim ideas to make an aesthetic statement or an artistic expression.