# Shakuhachi.net

Best place for relax your brain

# What is the best stripe size for RAID 5?

## What is the best stripe size for RAID 5?

For optimum performance it is recommended to choose 64KB as the stripe size* when creating a RAID 5 logical drive. On all other RAID controller cards (SATA II, SAS, and Ultra320 SCSI) typically the default stripe size* is 256KB set for optimal performance in most environments.

### What is stripe element size?

The stripe size is the storage capacity for each individual hard drive in a RAID array, which the user can define with most RAID controllers. Typical options are 16, 32, 64 and 128 kB, but many professional RAID controllers also offer smaller stripe sizes, and some even support sizes as large as 256 kB.

How is vSAN capacity calculated?

Use this formula to determine the raw capacity of a vSAN datastore. Multiply the total number of disk groups in the cluster by the size of the capacity devices in those disk groups. Subtract the overhead required by the vSAN on-disk format.

How many hard drives do you need for RAID 5?

three drives
RAID 5 provides fault tolerance and increased read performance. At least three drives are required. RAID 5 can sustain the loss of a single drive. In the event of a drive failure, data from the failed drive is reconstructed from parity striped across the remaining drives.

## What is the strip size of a five disk RAID 5 set with a strip size of 32Kb compare it with the stripe size of a five disk raid0 array with the same strip size?

Answer:- The stripe size of a five-disk RAID 5 is: 32Kb x 4 = 128Kb The stripe size of a five-disk RAID 0 is: 32Kb x 5 = 160Kb The size of the stripe is greater in RAID 0.

### What is RAID chunk size?

The chunk size determines how large such a piece will be for a single drive. For example: if you choose a chunk size of 64 KB, a 256 KB file will use four chunks. Assuming that you have setup a 4 drive RAID 0 array, the four chunks are each written to a separate drive, exactly what we want.

Does vSAN need RAID?

Yes that’s correct – vSAN does not use hardware RAID, instead the data is protected at the software layer. vSAN uses a concept of disk groups with a minimum of one disk group required per host. A disk group can contain up to seven capacity devices and one cache device.

How many hosts are required for vSAN?

three hosts
A standard vSAN cluster must contain a minimum of three hosts that contribute capacity to the cluster. A two host vSAN cluster consists of two data hosts and an external witness host.

## What is the recommended stripe size for Veeam raid?

There are also a few points on stripe sizing if you can configure this on your RAID volume. Typical I/O for Veeam is 256KB to 512KB, Windows Server 2012 defaults to 64KB, some arrays to 32KB. That’s a lot of wasted I/Os!

### What is raid chunk size and why is it important?

RAID chunk size is an important concept to be familiar with if you’re setting up a RAID level that stripes data across drives, such as RAID 0, RAID 0+1, RAID 3, RAID 4, RAID 5 and RAID 6. But, before we talk about chunks, it’s important to set the context in which RAID chunk size is important.

What is RAID striping in Linux?

RAID striping. RAID systems take a number of disks and present them as one drive to the user. Data is written to the drives using mirroring (replicating the same data across two or more drives) and striping, in which chunks of data from the same file are distributed across the drives that form the RAID array.

What is an SSHD in RAID 5?

SSDs in RAID 5 are all about a combination of speed and cost-effectiveness, not just speed. The only RAID configuration faster than RAID 5 is essentially RAID 0. It’s actually the most cost-effective solution to maximize performance, provide some data-loss resilience, and minimize cost to provide those functions.