What is Intel Zotac Zbox?

ZOTAC ZBOX Intel Rapid Storage Technology Introduction Intel Rapid Storage Technology is a Windows-based application that provides improved performance and reliability for systems equipped with SATA disks for desktop, mobile, and server platforms.

How do I Turn On my Zotac Zbox?

Turning on the system Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system. When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet to save on power consumption. 16 ZOTAC ZBOX Positioning your ZOTAC ZBOX

How to install a second hard disk in Zotac Zbox?

Insert the hard disk into the slot at a 45 degree angle and gently slide into the connector. 4. Reinstall the thumb screw. 5. If you need, install the second hard disk as the above steps. 13 ZOTAC ZBOX

What are the components on this side of the Zotac Zbox?

ZOTAC ZBOX Getting to know your ZOTAC ZBOX Front view Refer to the diagram below to identify the components on this side of the system 1. Headphone/Audio Out jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones. 2.

What are the features of the Zotac Zbox nano?

• Digital 8 Channel Audio (LPCM/bitstream via HDMI) • SPDIF output Operating System support • Windows 7 64bit, Windows 8.1 64bit, Windows 10 32bit/64bit Product Dimensions • 127.8mm x 126.8mm x 56.8mm 4 ZOTAC ZBOX nano Safety information

What are the components of the Zotac Zbox rear view?

ZOTAC ZBOX Rear view Refer to the diagram below to identify the components on this side of the system. 1. WiFi antenna connector The WiFi antenna connector supports WiFi antenna module. 2. LAN ports The eight-pin RJ-45 LAN ports support standard Ethernet cables for connection to a local network. 3.

Are there any safety instructions for my Zotac Zbox?

Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for infor- mation technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system ™ Read and follow all instructions in the documentation before you operate your system.

How to turn off the logo indicator on my Zotac Zbox?

Use the arrow keys to navigate to the Power menu and select Logo Indicator. 3. Press and select Turn off. 4. Press F10 to save the configuration and exit. 9 ZOTAC ZBOX Installing Hardware inside ZOTAC ZBOX Before installing hardware, please follow the instructions below to remove the cover of your ZOTAC ZBOX. 1. Unscrew. 2.