What is EASA Part 21 Subpart G?

An EASA Part 21 Subpart G organization is an organization which has approval to manufacture aircraft parts and appliances in conformity with approved data. The production organization certifies and releases the product on either Form 52 for a complete aircraft or EASA Form 1 for components.

What EASA 21?

EASA Part 21 – Design, Certification and Production. Part 21 regulates the approval of aircraft design and production organisations and the certification of aircraft Products, Parts and Appliances.

What is a Part 21 Organisation?

An EASA Part 21 Subpart G organisation is an organisation which has approval to manufacture aircraft parts and appliances in conformity with approved data. The production organisation certifies and releases the product on either Form 52 for a complete aircraft or EASA Form 1 for components.

Which of this subpart stated the requirement for design Organisation approval under Part 21?

Civil Aviation Directive 8401 –
1.1. 1 These Directives are the Civil Aviation Directive 8401 – Design Organisation Approval (CAAM Part 21 Subpart J) [CAD 8401], Issue 01/Revision 00, and comes into operation on 1st May 2021.

What is a UK Part 21 aircraft?

Part-21 aircraft (formerly known as EASA aircraft) are required to be certificated and operated in accordance with the UK (formerly EASA) Basic Regulation and retained former EASA regulations made under it. Most modern certificated factory-built aircraft (other than microlights and gyroplanes) are considered Part-21.

What’s involved in an EASA Part 21 Subpart G organisation?

What’s involved in an EASA Part 21 Subpart G Organisation? An EASA Part 21 Subpart G organisation is an organisation which has approval to manufacture aircraft parts and appliances in conformity with approved data.

Where can I find the lists of EASA part-21 approval codes?

The lists, together with an explanatory note describing the codes and information used, are available in the Downloads box. Initial application: A new application for an EASA Part-21 subpart G Production Organisation Approval shall be made through the EASA Portal.

What is the CAA Part 21 Subpart G course?

In this course, you will find out how to do that. Your UK CAA expert instructors will provide an overview of EASA/UK CAA Part 21 Subpart G and associated Acceptable Means of Compliance (AMC) and Guidance Material (GM). This course covers information on the requirements of UK CAA Part-21G, and its links to EASA Part-21G.

Can minor repairs be approved by EASA?

Minor repairs may be approved by any appropriately approved Design Organisation Approval Holder (DOA) or by EASA. Subpart O – Concerns European Technical Standard Order (ETSO) Authorisation. ETSO is a minimum performance standard for specified articles for example (avionics, components etc).