What gear ratio is GU6?

What gear ratio is GU6?

GM RPO Codes – Factory Identification Labels and Interpretation

RPO Code Description Ratio
GU3 Axle Rear 2.93
GU4 Axle Rear 3.08
GU5 Axle Rear 3.23
GU6 Axle Rear 3.42

How wide is a Camaro rear end?


Year Classic Vehicles Width Rear
68-72 Chevelle with 10 bolt axle
89 Trans AM (Disc brake)
76-80 Camaro / Firebird 60 ½”
68-83 Corvette 59 ½”

What differential is in a 2010 Camaro SS?

The FE3 rear axle uses a limited slip differential on both manual- and automatic-equipped models; and the rear spring rate is increased to 66 Nm and wheel travel is reduced to 100 mm. Coil-over shock absorbers are used in the rear with a decoupled, hollow stabilizer bar.

Are 3.73 or 4.10 gears better?

3.73 VS 4.10 Ratio

3.73 Ratio 4.10 Ratio
Not as fast off of the line Quicker Off The Line
Lower Torque Higher Torque
Better Gas Mileage Decreased Gas Mileage
Higher Top Speed Lower Top Speed

What is G80 code?

Often referred to as the G80 for its order code, the rear axle locks automatically if one wheel starts to spin, enabling both rear wheels to propel the truck. The added traction lets a 2WD pickup to go places traditionally thought of as 4×4 territory, and further enhances the capability of 4×4 pickups.

How wide is a stock g-body rear end?

Products specifications

Vehicle Fitment 78-87 GM G-body vehicles (Malibu, Monte Carlo, Monte Carlo SS, El Camino, Regal, Grand National, Cutlass, Cutlass 442, Cutlass Salon, Grand Prix, Caballerro and Station Wagons)
Brake Space 2.5 inch axle standoff
Width 58 inches (between wheel mounting surfaces)

How wide is Ag body rear end?

Unless you plan to cut and narrow the rear, the Fox-body rear is by far the best choice of the bunch, since it is the closest to the factory G-body width (57.25-inches).

What rear gears are in a 2010 Camaro SS?

Richmond rear end gears for your 2010 & 2011 Camaro SS – available in 3.73, 4.10, and 4.11 gear ratios.

What gear ratio is in a 2010 Camaro SS?

With this gear kit, the 2010-2014 Camaro SS gets the same gear set ratio (3.91) found in the 1LE 2013 Camaro. This 3.91 Performance Gear Kit Package offers a lower (higher numerically) ratio rear drive gear, which will increase effective rear wheel torque multiplication (TM) in 2010-2013 SS Camaros.

What are the axle codes for a 68 or 69 Camaro?

Example: BL 1122 G2 For a 68 or 69 model, this is interpreted as a 3.07:1 axle ratio, non-posi, 12-bolt rear axle assembled on November 22, 67 or 68 by the Detroit Gear & Axle plant, second shift. After much research, CRG is pleased to publish a comprehensive list of 67-69 Camaro axle codes.

Is the Z28 included in standard equipment on a 1978 Camaro?

Prices could be reduced or option could be had at no charge if it was included as standard equipment on the Z28 or Type LT model. 1978 Camaro Exterior & Interior Color Codes Trim Tag (Norwood Built Camaro)

What do the numbers mean on a Camaro model number?

* Fifth digit is model level: P = Camaro (all models) * Sixth digit is body style: 2 = Hatchback Coupe, 3 = Convertible. * Eighth digit is engine code: F = 305ci V8 (LB9), E = 305ci V8 (L03), T = 191ci V6 (LH0), 8 = 350ci V8 (B2L or L98)

How many belts does a Camaro Z28 sport coupe have?

Camaro Z28 Sport Coupe 54,907 5,603.85 AK1 Belts, color-keyed seat and shoulder 96,221 21.00 AN6 Adjustable Seat Back, driver side