What does error code F21 mean on a Kenmore washer?

What does error code F21 mean on a Kenmore washer?

Long Drain error
@gwenr Error F21 is a Long Drain error. If the drain time exceeds 8 minutes this error code will be displayed. In addition, a “SUDS” error may also be displayed. This may be an indication of a drain pump problem and/or clog in the drain line. Unplug your machine for 1/2 hour to see if the CCU will reset.

What does F11 mean on Kenmore Elite washer?

F11 is an indication of a communications problem. Communications cannot be sent correctly between the machine control board and the motor control board. Here are some possible causes: Loose wire connection at either the machine control board or motor control board.

What does flashing F mean on Kenmore Elite washer?

The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly. You should then be able to open the washer door and remove the wet laundry.

What does De mean on Kenmore Elite washer?

The DE code indicates a problem with the door locking and can be the control, door latch or door switch assembly. The first image will help with this. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician.

What is F20 code on Kenmore washer?

@dilligaff F20 means that you have a water fill problem on the washer. ” If the washer is not filling when the F20 appears: Check to see if you have Flood Safe devices on the inlet water hoses to your washer.

What to do if your Kenmore washer is not working?

The table filled with the error codes of Kenmore washers is the first aid for your device. In most cases, you can fix the machine very quickly. It is necessary to know that the basic error codes are diagnosed in all washer`s models of the brand. But some codes are related to certain models, for example, Oasis.

How do Kenmore Elite He3 washer error messages work?

Kenmore’s Elite HE3 washer has a comprehensive error reporting system. The error messages appear on the display along with a tone sound. While the error messages aren’t written in plain English, they provide codes that can be looked up–or if the issue happens often enough, you’ll get to know the code’s translation from memory.

What does the F/H fault code on my Kenmore Elite washer mean?

The “F/H” fault code will display if: The water level pressure switch does not trip. Water is not entering the washer Flow meter is not detecting water coming in.

What does F20 mean on a Kenmore Elite washer?

Check the display for an error message and identify the error message. “SUD” means that the Suds Routine has run and excessive suds remain and have been detected. “F20” indicates a water inlet problem with no or insufficient water supply. “F21” is a drain problem.