How much is Braemar wall furnace?

$1,699.00. Braemar’s wall furnace is Australia’s most attractive and functional. Its slim-line design makes it as discreet or as visible as you like, and with a stunning ‘Ivory Sands’ finish, it complements any decor.

How much does a wall furnace cost?

Wall Furnace Costs and Considerations Typically, wall furnaces cost between $1,800 and $2,500, depending on size, heat source and heating capacity. Wall furnaces average half the unit price of a central forced-air furnace.

How much does it cost to install a gas wall furnace?

On average, it typically costs between $1,000 and $1,350 to install a gas wall furnace or heater. This cost includes the price of the heater itself, all supplies required, and labor. On the high end, it could cost as much as $2,500 for a brand-new gas wall heater.

Do they still make wall furnaces?

However, wall furnaces are still very much in use and Bill Howe Plumbing has been the wall furnace experts since 1980. Wall furnaces are installed directly into the wall and vented out through the home in single-story homes, and through the ceiling in multiple story homes.

Where are Braemar heaters made?

Australia
Australia and New Zealand’s leading gas heating range is proudly manufactured by Seeley International at its factory in Albury, New South Wales. Braemar has been keeping families wonderfully warm for more than 50 years.

What is a wall furnace?

A direct-vent wall furnace is a self-contained sealed combustion heating appliance that warms inside air by recirculating it around a sealed chamber, and discharges combustion byproducts outside the home via direct-vent. They are permanently attached to the structure of a building, and are not connected to ductwork.

How long does a wall heater last?

Wall heaters are more compact and use less wall space, which gives your more flexibility with furniture arrangement. Wall heaters usually last somewhere between 8 and 12 years. Baseboards usually last more than 20 years.

How much does it cost to install a wall heater?

Installation rates for electric wall heaters vary depending on the type of heater selected and how much prep work is needed. Labor costs range from $85-$200. If your project requires extensive electrical work the cost may increase by $400 or more. The heater itself can cost between $100-$500.

How much does it cost to put a wall heater in?

When should I replace my gas wall heater?

However, as with any piece of gas equipment, you should have your wall heaters inspected annually. Some of the issues that may constitute a wall heater replacement include: An Increase in your Energy Bills: If your bill seems higher than usual, your gas wall heater may be losing efficiency.

Are wall furnaces safe?

Being wall mounted also eliminates dangers found in other heaters. Since the unit is fixed to a permanent location, there is no risk of it being tipped over and causing a collateral fire. In short, a wall mounted heater, especially the Envi Heater model, is a safe and reliable heating solution for your home.

How much does it cost to run a gas wall heater?

Did you know one gallon of Propane costs approximately $3.00 (local average)? One gallon of Propane contains 92,000 Btu’s, which will operate a 30,000 Btu wall heater for a little more than 3 hours. This means the cost to operate a 30,000 Btu wall heater using Propane is around $. 80 per hour.

What is a wf30 wall furnace?

One of Australia’s most attractive and functional wall furnace heating systems, the WF30 is an ideal replacement for existing wall furnaces and is able to heat up to 90m2. Only available in natural gas. This product requires technical assistance.

How much does a Braemar furnace cost?

Noisy. Metal makes clicking noise when thermostat turns on/off. Our 24 year old wall furnace did a much better job. Very disappointed as Braemar has such a good name. Price included installation. Purchased in July 2021 for $6,999.00.

What is the difference between wf30 and wf40?

The WF30 is an ideal replacement for existing wall furnaces and is able to heat up to 90 m². The WF40 will heat an approximate area of 80 -110 m² and is recommended for light commercial or large domestic applications such as halls and large rumpus rooms.

What is the best wall furnace in Australia?

Braemar?s wall furnace is Australia’s most attractive and functional. Its slim-line design makes it as discreet or as visible as you like, and with a stunning ‘Ivory Sands’ finish, it complements any decor.