How does Kemiko stain concrete?

How does Kemiko stain concrete?

First, remove any Kemiko sealer. Then, apply a stain color. To achieve a lighter stain color on a previously stained floor, apply Kemiko Buildable Overlay to provide a cementitious surface that will react with acid stain. More about Kemiko Stone Tone™ Concrete Acid Stain.

What is concrete acid stain?

Acid stains are one of the oldest ways to color concrete. The acid in the stain lightly etches the surface, allowing the metallic salts to penetrate more easily. Once the stain reacts, it becomes a permanent part of the concrete and won’t fade, chip off, or peel away.

How do you stain concrete to look like stone?

Spray the darker of the two concrete stain shades over the first, using the same technique as before. Again, mist lightly to avoid making the color too opaque. It should blend gently with the base color to mimic a realistic stone appearance.

How do you use Kemiko Neutra clean?

Bare Concrete — Apply Kemiko Neutra Clean to substrate, allow 2-3 minutes to “wet in” then scrub using stiff bristle brooms, brushes or heavy duty floor scrubbing machines. DO NOT ALLOW KEMIKO NEUTRA CLEAN TO DRY ON SURFACE.

How do you stain stone?

How to Stain Exterior Stone

  1. Put on protective gear, including safety goggles, gloves and a dust mask.
  2. Clean the stone with trisodium phosphate mixed with water using a scrub brush.
  3. Pour the acid stain into a plastic spray bottle or a garden sprayer.
  4. Let the stain dry for 24 hours.

What is the difference between concrete stain and acid stain?

The main difference between an acid stain and a water based concrete stain is how they interact with the concrete. Acid stains have a muted more natural coloring. They penetrate into the concrete’s pores and interact with it’s natural coloring.

Is acid staining bad for concrete?

Wet concrete can burn your skin, while concrete dust can hurt your lungs. Acid stain is comparatively pretty safe — but there are still some safety procedures you should consider. While acid stains can cause burns, those are easy to avoid. “Acid stains are pretty benign.

Is it possible to stain stone?

However, most stone can be stained using an acid stain designed to penetrate masonry surfaces. Wipe the area with a dry paintbrush in a circular pattern to work the stain into the stone. The circular rub creates natural-looking color variations in the stain. For a darker color, apply a second coat of stain.

What is kemiko stain?

KEMIKO® Stone Tone™ Concrete Acid Stain is an acid base, reactive stain. This interior/exterior reactive stain is zero VOC, UV resistant and will not chip, fade or peel. This acid stain is formulated to chemically bond with the concrete to create permanent, unique colors that simulate the look of natural stone and marble.

What can you use kemiko wax on?

Kemiko Wax is designed for use on porous surfaces (primarily interior) that are unaffected by contact with mineral spirits, such as new and old concrete, unglazed brick and tile, flagstone and unsealed wood. Wax enhances the depth of color and provides surface protection. The wax is water and dirt resistant.

What is the co coverage of kemiko stone tone sealer?

Coverage: 250-350 sq. ft. per gallon depending upon the porosity of the surface. Kemiko Stone Tone Sealer is a high solids (30%) water base Acrylic Urethane Sealer.