How do I reset my GE Arctica ice maker?

How do I reset my GE Arctica ice maker?

How to Reset a GE Profile Arctica

  1. Disconnect the power to the Arctica refrigerator and wait 30 seconds. Restore power.
  2. Replace the household fuse or reset the circuit breaker if unplugging the refrigerator does not reset the controls.
  3. Perform a complete system reset by using the refrigerator’s self-diagnostic mode.

Why is my GE Profile refrigerator ice maker not working?

If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. If the water pressure is sufficient, use a multimeter to check for power to the water inlet valve.

Why is my GE Profile Arctica refrigerator not cooling?

Check to see if both fans are working. The evaporator fan is in the freezer section and the condenser fan is by the compressor. If the compressor is running the condenser fan motor should also be running. Make sure the condenser coils are clean and air flow across them is not restricted.

Why is my GE Profile’s icemaker not working?

The GE Profile’s icemaker may not be working, if there is a problem with the filter, with the door switch, or with the temperature not being correct. You could also have more advanced problems, such as a bad inlet valve, or a blocked-up water line. Having ice when we need it, has become a necessity.

How to troubleshoot GE Profile Arctica refrigerator problems?

How to Troubleshoot GE Profile Arctica Fridge Problems 1 GE Profile Arctica Operation Problems. Check first to make sure that the power cord is plugged in to an operating outlet. 2 Door and Temperature Problems. Check the doors of the refrigerator. 3 Problems With Icemaker. 4 Water Dispensing Problems.

How do I know if my Arctica ice maker is working?

When properly functioning, ice makers of the Arctica series produce and store up to 10 pounds of ice at a time. If your ice maker doesn’t produce ice at all, check its switch; some Arctica ice makers have an “On/Off” switch, and others have switches labeled “I/II.” Flip the switch to the “I” setting.

Why is my icemaker not making ice?

First, check to make sure that the icemaker power switch is set to “On.” Check that the water line is connected to the water pipes in your house. The icemaker will not make ice if it is getting no water. Check the level of ice cubes in the ice bin.