How do I console into APC?

Tutorial APC UPS – Console Access using the Serial Cable If COM1 does not work you will need to try to use COM2, COM3, COM4 or the next. On the prompt screen, enter the administrative login information. After a successful login, the console command-line will be displayed.

How do I find APC UPS on network?

Start the Network Management Card Device IP Configuration Utility. Enter the full IP address range of your network and click on the button to start the search for the UPS. The system will automatically locate the IP address of your APC UPS.

What is the default IP address for APC UPS?

192.168.2.66
The default IP address is 192.168. 2.66 with a subnet mask of 255.255. 255.0. The default username is admin and the default password is admin01.

How configure APC PDU IP?

APC PDU configuration trick

1. Use ARP to define an IP address for the PDU, and use the PDU’s MAC address in the ARP. command.
2. Use Ping with a size of 113 bytes to assign the. IP address defined by the ARP command. For.
3. Use Telnet to access the PDU at its newly. assigned IP address.
4. Use apc for both user name and password.

How do I configure APC Network Management Card network settings?

You are now in the control console.

1. Choose “Network”
2. Choose “TCP/IP”
3. Choose “Boot mode”
4. Change Boot mode to “Manual”
5. Set the system IP, subnet mask, and default gateway.
6. Accept changes.
7. Press Ctrl-C to return to main menu.
8. Log out of console to save changes.

What is the APC Smart Connect port?

APC SmartConnect – a feature which allows you to view the status of your UPS through a secure web portal. Through this innovative remote monitoring interface, you’ll receive automatic notifications, firmware updates, and advanced support.

How configure APC PDU IP address?

How do I assign an IP address to the APC AP7900?

Photo by Antaira. By default, the APC AP7900 does not have an IP address assigned. The easiest way to configure an IP address is to log into the PDU over a serial port. Most servers still come with a built-in 9-pin serial port, but most desktops and laptops do not.

How do I access an APC ups using the console cable?

If COM1 does not work you will need to try to use COM2, COM3, COM4 or the next. On the prompt screen, enter the administrative login information. After a successful login, the console command-line will be displayed. Congratulations! You are now able to access an APC UPS using the console cable.

How do I configure an APC network management card?

An APC Network Management Card must be configured with network settings before it can communicate on the network. Once the cards have been configured with an IP address, Subnet Mask, and Default Gateway the cards can be accessed, managed, and controlled from other computers on the network.

What is the MAC address for the APC device?

All APC devices have a MAC address that begin with 00 C0 B7 which may help while reviewing your DHCP Client List. In order to configure your Network Management Card-enabled device, select one of the available configuration methods listed below: Device IP Configuration Wizard – (NMC1/NMC2/NMC3)