How do I access my WAN router?

How do I access my WAN router?

To access the Router, you should enter your Router’s WAN IP address into your browser’s address (in IE) or location (in Netscape) box and the custom port number. For example, if your Router’s WAN address is 202.96. 12.8 and you use port number 8080, enter in your browser.

How do I use the WAN port on my router?

WAN stands for Wide Area Network which is basically the internet. The WAN Port is used to connect the router to your internet connection. Your ISP has supplied you with a modem that builds up the internet connection….WAN vs LAN Port.

WAN port LAN port
Only 1 port on your router Often 4 ports on your router

How do I setup my WAN router?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

What is WAN IP mode?

(Wide Area Network Internet Protocol address) The WAN IP is the IP address assigned to the Internet-facing (public-facing) side of a network by the network administrator in a large enterprise or by an ISP.

What is my WAN IP?

The Wide Area Network (WAN) IP address of your router is the address supplied by your Internet Service Provider (ISP). Your router’s WAN IP address can be check in the router’s web-based setup page.

When should I use WAN port on router?

A WAN port is used to connect to an internet source, such as a broadband modem. The WAN allows the router to connect to the internet and share that connection with all the Ethernet-ready devices connected to it.

What is PPPoE in WIFI?

Point to Point Protocol over Ethernet (PPPoE) is a type of broadband connection that provides authentication (username and password) in addition to data transport. Most DSL providers use PPPoE to establish Internet connections for customers.

Is PPPoE better than DHCP?

Conclusion. There is not better than the other, they serve two entirely different functions, with zero overlap. Both PPPoE and DHCP are critical in connecting to the network, which works to acquire IP address. What distinguishes PPPoE vs DHCP is the methods to obtain IP.

What are WAN settings?

Wide Area Network (WAN) settings let you control how Google Nest Wifi and Google Wifi connect to the internet. The type of WAN connection you have is generally determined by your Internet Service Provider (ISP).

What is WAN IP settings?

A WAN address is the IP address that your router uses to connect to the Internet. It is different from IP addresses of computers and devices on a local network, because the WAN IP is essentially shared by all the devices.

How do I set up Lan to Wan on my router?

LAN TO WAN connection To make a LAN to WAN connection you need the following: Set the main router as (for it’s main LAN address) Enable DHCP letting it give an IP address to all the devices connected to it: –

How do I set the LAN address of the second router?

Set the LAN address of the second router as anything from between to (like you would set a normal device address). In this example, we will set for the second router.

How do I configure the global parameters for my router?

To configure the global parameters for your router, follow these steps. Enters global configuration mode, when using the console port. Specifies the name for the router. Specifies an encrypted password to prevent unauthorized access to the router. Disables the router from translating unfamiliar words (typos) into IP addresses.

How to connect a modem to a wireless router?

Insert your modem’s AC adapter to the DC-IN port and plug it to a power outlet. Insert your wireless router’s AC adapter to the DC-IN port and plug it to a power outlet. Use another network cable, connect your modem to your wireless router’s WAN port. Use the bundled network cable, connect your computer to your wireless router’s LAN port.