How can I apply for saree in fall?

How to stitch saree falls

1. Prepare the saree falls material. The fabric used to stitch saree falls is typically a cotton fabric roughly 3 meters long and 5 inches wide.
2. Measure and mark before stitching.
3. Add pins to secure the saree falls before stitching.
4. Start stitching.
5. Check for finishing.

What is fall and Pico stitching?

Know About Saree Fall Pico Too It is the process in which sarees are folded from the edges and then stitched. Only a few millimeter of the fabric is folded which is almost seamless. It is done to ensure the complete protection of the edges of the saree so that it does not get scratched or withered at all.

Is saree Fall necessary?

Well, ideally, a saree should not be worn without attaching a fall to it first. However, if you really are in a hurry, you may wear sarees in thick, sturdy fabrics, once or twice, without a saree fall. Thin and light-weight fabrics definitely need a saree fall, or they will not drape, pleat and fall well.

What does saree fall mean?

Saree fall refers to sturdy cotton or terry-cotton fabric that is sewed and attached to the hem of a saree, such that it covers the initial drape and pleats area only. Fall is attached from the wrong side of the sari, and must not be visible from the outside.

How do you repair a tear in a silk saree?

Place the damp cloth on top of the fusible fabric patch. Press the iron onto the cloth, onto the fusible patch, over the hole/rip in the silk. The pressing cloth eliminates scorching of the delicate silk. Hold the iron over the cloth and patch for the fusible fabric manufacturer’s recommended amount of time.

What is the cost of Pico machine?

Compare similar products from other sellers

	Ask Price	₹ 14,500
Machine Type	–	Motor Operated
Body Material	–	–
Max Stitch Length	–	4 mm

What is interlock stitch?

Basically, the interlock stitch employs many of the same steps as used in creating a buttonhole stitch. The difference is that interlock stitches double back on themselves at each row of the stitch pattern. To begin the loop back, begin by anchoring the thread on the underside of the garment.

Do organza sarees fall?

Organza sarees cannot be easily tamed, but can be draped in such a way to emphasise the fall of the saree to compliment any body type.

Can I wear a saree without petticoat?

You can wear a saree without a petticoat. While this skirt-like bottom half of the three-piece outfit is traditional, you can swap it out with other pieces of clothing. Leggings and shapewear are acceptable alternatives to petticoats. You can drape a saree in a hundred ways, so there is no one true way to wear one.

What is fall and edging?

Fall and Edging gives the saree an elegant flow and protects the saree from wear and tear. Edging is done on both sides of the saree to give a smooth edge. The fall is lining material (approx. 3 metres long and 10cm wide) stitched to the inner rim of the saree.

What is saree pallu?

Pallu – the loose end of a saree – generally draped over shoulder/s – is integral in saree drape and design. Starting where the pleats end, the pallu finds its meandering, luxuriant way from the hip-area to the shoulders – sensuously and gracefully covering the mid-riff and bosom.

What is saree fall?

Saree fall refers to a sturdy cotton or terry-cotton 5 inches broad and 3 metres long strip of fabric – that is sewed and attached to the hem of a saree, such that it covers the initial drape and pleats area only. Fall is attached from the wrong side of the sari, and must not be visible from the outside.

Do tailors attach saree falls in India?

In India, traditionally, friendly neighborhood tailors oblidge and agree to attach saree falls, and thus, rarely anyone gives proper thought to saree’s humble companion. Q4. Does a saree fall need to be attached by hand only?

How do you attach a saree fall by machine?

Do not attempt attaching a fall by machine, unless you are adept at it, and your machine has appropriate settings and needle for this purpose. Spread and lay your saree flat on a surface, and attach the saree fall on the wrong side – with all-pins to the area that requires the fall (the fall must end before the drape that lead to the pallu).

How do you attach a saree to a pallu?

Spread and lay your saree flat on a surface, and attach the saree fall on the wrong side – with all-pins to the area that requires the fall (the fall must end before the drape that lead to the pallu). Now, use running stitch to secure the lower end of the fall first, as it is less tricky.