Why does my printer keep saying carriage jam?

Why does my printer keep saying carriage jam?

A carriage jam may indicate the carriage is blocked from moving of that there is a problem with the position sensor for the carriage. Let’s start by performing a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

What is print carriage Cannot move?

The print carriage might try to move into the access area. If so, allow it to move to that position. Without turning off the product, unplug the power cord from the back of the product. Unplug the power cord from the power source.

How do I clear my HP carriage jam?

Step three: Clear the paper jam from the front of the All-in-One

  1. Open the carriage access door.
  2. Gently pull the paper out of the rollers.
  3. Close the carriage access door.
  4. Reconnect the power cord to the back of the product.
  5. Press the Power button ( ) to turn on the product.
  6. Try to print a self-test report.

How do I fix a carriage jam on my HP printer?


  1. Step one: Turn the All-in-One off and on again.
  2. Step two: Clear any paper jam.
  3. Step three: Make sure that the print carriage can move freely.
  4. Step four: Remove the print cartridges.
  5. Step five: Reinstall the print cartridges.
  6. Step six: Make sure the control-panel faceplate is correctly installed.

How do you fix a carriage Jam printer?

Follow the steps for fix HP Printer Carriage Jam Turn off the printer and open it to see where the paper is stuck. Manually move the carriage toward the opposite side. Check the paper path and remove any piece of paper or any other object that is stuck in the path. Reconnect the power cord and turn on the printer.

How to fix a printer Jam?

Locate and remove any paper stuck in the loading tray. Remove any loose paper in the loading tray. Press the Resume button on the front of the printer.

  • Clearing the jam from the rear of the printer. If you can’t get to the paper jam from the loading tray, follow the instructions to clear the paper from the
  • Pulling the paper out from under the front cover. If all the previous steps have failed, you may attempt to remove the jammed paper by pulling it out from under
  • How to unjam a printer?

    Unplug the printer, while on and leave it unplugged for 30 minutes. Put the printer back in sometime, this action reset the error.

  • Probably there is something inside the printer blocking a paper sensor along the paper path.
  • Try removing all ink cartridges and reinstall them one at a time. Move the carriage over to the far left, and then back in position.
  • How do you clean a printer carriage?

    Manually Cleaning Printheads. Use the lint-free cloth to wipe the contact points in the print carriage. If the residue won’t come off, use a cotton swab wet with bottled water to remove the residue. Wait 5 minutes after you have cleaned the printer contacts before replacing the ink cartridge. Place the ink cartridges back in the printer cartridge.