Which is a factor to be considered as unapproved part?
According to the FAA’s handout on Suspected Unapproved Parts, an unapproved part is “A part, component, or material that has not been manufactured in accordance with the approval procedures in FAR 21.305 or repaired in accordance with FAR Part 43; that may not conform to an approved type design; or may not conform to …
How do you deal with a suspected unapproved part?
Suspected Unapproved Parts ( SUP ) Program
- Contact the FAA Hotline.
- Mail a hard copy to the address below: Office of Audit and Evaluation. Attn: AAE-300, Room 911.
- Parts Manufacturer Approval ( PMA ) List of PMA Parts.
- FAA Form 8120-11, Suspected Unapproved Part ( SUP ) Report.
What are bogus parts?
Bogus Parts: The term “bogus parts” has come to refer to a number of aircraft parts categories, ranging from properly manufactured parts that lack re- quired documentation to defective and deliber- ately counterfeited components.
What categories is FAA approved parts produced?
NOTE 1: Parts, which have been maintained, rebuilt, altered, or overhauled, and approved for return to service in accordance with parts 43 and/or 145, are considered to be “approved parts.” Parts that have been inspected and/or tested by persons authorized to determine conformity to FAA-approved design data may also be …
Do airlines reuse parts from crashed planes?
The airlines do the same thing because these parts still work and are often cheaper or they might be the only option if the aircraft has been out of production for quite some time. After Eastern Airlines flight 401 crashed in the Everglades, Eastern Airlines reused parts from the crashed plane in their other Tristars.
What is a FAA PMA?
“PMA” is an acronym for “Parts Manufacturer Approval.” It is both a design and production approval issued by the FAA.
How do I report a SUP?
The FAA Aviation Safety Hotline may be called at 1-800-255-1111 to report any conditions affecting aviation safety, which includes SUP reports. In addition to the Safety Hotline, any FAA office can take SUP information and forward it to AVR-20 or an individual can call AVR-20 directly to make notification.
What does PMA mean in aviation?
Parts Manufacturer Approval
Parts Manufacturer Approval (PMA)
What are the four ways approval for replacement parts may be obtained?
It may be approved by the original manufacturer; it may be approved under a Parts Manufacturers Approval (PMA) by an after-market manufacturer; it may be approved as part of an Supplemental Type Certificate (STC) by an after-market manufacturer; it may be approved by meeting the requirements of a Technical Standard …
Can you buy an old 747?
Sure, the 747 is a Type Certified and airworthy aircraft, the FAA does not really care who owns it so long as they play by the rules. Boeing even sells them directly to the private market via their BBJ line. There are even a few used ones listed for sale right now.
What is a Der in aviation?
Engineering and Flight Test designees are responsible for finding that engineering data complies with the appropriate airworthiness standards. These designees are called Designated Engineering Representatives, or DERs .
Where do unapproved aircraft parts come from?
In 1996 unapproved parts were found to originate from sources such as counterfeiters, thieves, “strip and dip” operations which hide defects with metal plating, and from production overruns. The crash of Partnair Flight 394 in 1989 resulted from the installation of counterfeit aircraft parts.
What is the FAA Suspected unapproved parts (sup) program?
On Nov. 13, 1995, the FAA opened the Suspected Unapproved Parts (SUP) Program Office in order to address issues related to unapproved parts. Since then, there have been more than 2,500 SUP investigations.
What is an unapproved part?
Such unapproved parts may not be installed on a type certificated product unless a determination of airworthiness can otherwise be made.” Basically, an unapproved part is a part that is not approved (does not meet FAA regulations). Here are a few examples of unapproved parts. Counterfeit parts.
How do I identify unapproved parts?
These have been a few tips to help identify unapproved parts and keep them from entering the supply chain. To report suspected unapproved parts, you can fill out FAA Form 8120-11, Suspected Unapproved Parts Notification (obtained from your FSDO or in AC 21-29) and mail to:
0