Where is the fuel pump shut off switch located on a 1994 Ford Explorer?
It’s in the front passenger’s side kick panel which is under the dashboard on the side of the passenger’s door.
How do you reset the fuel pump switch on a Ford Explorer?
To reset the fuel light on a ford explorer you will need to access the fuel reset switch which is located in the glove box or in the foot well of the passenger seat area, press that switch and the fuel system will be reset.
How do you reset a Ford fuel pump shut off switch?
The fuel pump shut-off switch has a red reset button on top of it. The fuel pump shut-off switch is located behind an access panel in the right rear quarter trim panel, near the liftgate. The fuel pump shut-off switch has a red reset button on top of it.
Where is the fuel pump relay on a 1995 Ford Explorer?
The fuel pump relay is below the fuse box under the hood. it is the relay closest to the rear of the vehicle.
Where is the fuel pump relay on a 1994 Ford Ranger?
The relay is located in the middle row with 13 fuses in the row. The fuel pump relay is the third relay from the right.
Where is the inertia switch located on a 94 Ford Ranger?
Sounds like you need to re-set your fuel pump inertia switch. It’s located under the dash in the passenger foot area, just at the front edge of the carpet. At the top of the switch is a white button, push it down to re-set it.
How do you reset a fuel pump control module?
How to Reset a Fuel Pump Shut Off Switch
- Locate your car’s inertial trigger or airbag control module.
- Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case.
What does the fuel pump reset button do?
In the event of an accident, the “Fuel Reset Button” will turn off the fuel pump and system.
Where is fuel pump relay?
Most fuel-pump relay units are located under the dashboard near the steering column. In some cases, the unit is located in the area where the steering column is mounted or near the engine’s firewall.
Where is the inertia switch on a 94 Ford Ranger?
You can find the inertia switch, which is also known as the fuel pressure inertia switch (FPIS), on Your Ford Ranger’s passenger foot area, under the dash, near the front edge of the carpet.
Where is the emergency fuel pump shut off?
If your vehicle is a sedan, the fuel pump shut-off switch is located on the right side of the trunk behind the trunk liner . If your vehicle is a wagon, the fuel pump shut-off switch is located behind the service panel on the right side of the cargo area.
Where is the fuel pump reset button?
Re: fuel pump reset button. The two most common places are in the trunk behind the fabric on either the left or right side. The second location is near the passenger side kickplate under the dashboard. You may have to remove the panel to access the button.
How do you reset fuel pump inertia switch?
To reset the fuel pump on a car or truck, locate the initial trigger of the vehicle, and press the inertia switch button. If the switch doesn’t have an external button, remove its cover to access the button or the breaker switch. If required, replace a blown fuse.
Where is the fuel pump reset switch located?
These are the trim pieces just ahead of your front doors where your foot typically brushes. Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case. You may need to turn the ignition key to the on or accessory position to energize the module and reset the switch.
0