What transmission goes with a k20a?

You can use any 5 or 6 speed from a K20 that uses the same VSS as your transmission.

What transmissions fit a K24?

The K24’s come from the TSX, Accord, Pilot, and CRV. A auto transmission from a TSX or a Accord will work but do know your talking about a good $2500+ investment on parts alone to do this after you have bought the engine and transmission.

What transmission does a RSX Type S have?

6-speed manual transmission** Ratios (:1): 1st: 3.266.

What is a gear ratio transmission?

Simply, a gear ratio is the relationship between two or more interlocking gears and their rotational speeds. The gear train is the system that mounts and interlocks the teeth of the gears. Because the gears and your vehicle’s transmission ratio is what affects how your vehicle performs.

Will a K24 transmission fit on a K20?

Premium Member. The transmissions are interchangeable between K20 and K24. You can use the Civic SI transmission you just need to modify the shifter mechanism and convert your VSS.

Are all K24 transmissions the same?

No. The Element and CRV have a longer case which allows for the mounting of the 4×4 mechanism. All of the internals are basically the same minus gear ratio changes. You can just buy the gears and shift linkages to make an Element tranny the same ratios and 6 speed as a TSx.

Will a K20 intake manifold fit on a K24?

The K24 Intake Manifold Adapter is a simple and easy way to install K20 style manifold on K24 heads. This can also be used to install K20 manifolds or cut RBC manifolds on 9th gen Civic si as the water bypass is slightly different and you will not need an intake manifold adapter when using the adapter.

How do I choose gear ratio?

The conventional procedure for selecting gear ratios is to pick ratios that run the engine rpm to redline at the end of the medium and longest straights, and pick the lower gear ratios to minimize the rev drop at each shift. This method minimizes the number of shifts per lap.

What is a 1 to 1 gear ratio?

If the gear ratio is 1:1, the amount of torque is the same, and the speed is the same. With the ratio 1:4, for example, you’ll get less torque but more speed.

How much HP can a K24 handle?

Registered. The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.