What motor does a John Deere 318 have?
|Model||John Deere 318|
|Engine||18HP Onan 781cc 2-cyl gasoline|
|Fuel Capacity||17.0 liters (4.5 US gal.; 3.7 Imp. gal)|
What size tractor do I need to run a tiller?
Consider this: A typical 5-ft rotary tiller with four tines can be run by a 25-hp tractor and the same 5-ft rotary tiller with six tines would need a 31-hp tractor to operate the tiller at peak performance. A 40-hp requirement jumps to nearly 50 hp with six tines.
What is the most popular John Deere lawn tractor?
John Deere 318 – America’s Most Popular Lawn Tractor Ever.
How do I find out what year my John Deere tractor is?
Locate your serial number in the third column labeled “serial number breaks.” This lists a range of serial numbers. If your serial number falls on or between the two serial numbers listed, you are in the right box. Look to the column to the left to determine the manufacture date of your lawn tractor.
Where are county line tillers made?
The tiller does an amazing job of grinding the fotter into the ground and making a fine seedbed. All of the Tarter is made in USA except for the driveshaft and gear boxes. It’s well built and heavy.
What is the best tiller for 318?
Someone else should be able to. The best tiller for a 318 without a rear gear-drive PTO is the 30 hydraulic tiller, by far… These attachments are a bit difficult to come by as most owners don’t want to part with one — but they are real tanks and do awesome work.
Do you have the rear PTO for your 318?
Do you have the rear PTO for your 318? The issue with the PTO on the 318 is it is 2k rpm where most tractors are 500 rpm. So you have to find a tiller designed to run at the higher rpm. I have not really seen the other two so I can’t comment on them. Someone else should be able to.
What kind of Mower does a Ford 318 have?
A rear-mounted finish mower was available for the 318, if equipped with three-point hitch and 2000 RPM rear PTO. Three baggers were available. A two-bag (6.5 bushel) Power Flow system had a fan that was belt-driven from the right-hand mower spindle.
What’s wrong with my 318?
The issue with the PTO on the 318 is it is 2k rpm where most tractors are 500 rpm. So you have to find a tiller designed to run at the higher rpm. I have not really seen the other two so I can’t comment on them.