# Shakuhachi.net

Best place for relax your brain

# What is samples per second?

## What is samples per second?

Glossary Term: Samples per Second In data conversion, an analog signal is converted to a stream of numbers, each representing the analog signal’s amplitude at a moment in time. Each number is called a “sample.” The number sample per second is called the sampling rate, measured in samples per second.

## How do you calculate samples per second?

The sampling frequency or sampling rate, fs, is the average number of samples obtained in one second, thus fs = 1/T. Its units are samples per second or hertz e.g. 48 kHz is 48,000 samples per second.

What is samples per second in ADC?

The sample rate for an ADC is defined as the number of output samples available per unit time, and is specified as samples per second (SPS). This is due to the small capacitor used to hold charge at the input of ADC during conversion to support high sample rates.

What does the sampling rate mean?

Term: Sampling rate (audio) Definition: Sampling rate or sampling frequency defines the number of samples per second (or per other unit) taken from a continuous signal to make a discrete or digital signal.

### What is the quantity of kilogram meter per second square?

newton
One newton equals one kilogram metre per second squared.

### Which of the following can be expressed in kilogram per square second?

kilogram meter squared per second squared (kgm^2/s^2) is the SI unit of energy which is equivalent to joule. It is the product of kgm/s^2 * m. Kgm/s^2 is equivalent to the SI unit of force, the newton and the SI unit of length, the meter.

How do you convert samples per second to frequency?

Discrete-time frequencies Suppose this represents an audio signal that is sampled at 8000 samples/second. Then to convert f to Hertz, just watch the units: f [cycles/sample] × 8000 [samples/second] = 8000f [cycles/second].

What is sample period?

The sampling period is the time difference between two consecutive samples in a Sound. It is the inverse of the sampling frequency. For example: if the sampling frequency is 44100 Hz, the sampling period is 1/44100 = 2.2675736961451248e-05 seconds: the samples are spaced approximately 23 microseconds apart.

#### What is sampling and sampling rate?

Definition: Sampling rate or sampling frequency defines the number of samples per second (or per other unit) taken from a continuous signal to make a discrete or digital signal. The net effect of higher sampling rate and conversion technology improves the audio quality within the ideal range of human hearing.

#### What is sampling rate in ADC?

The sample rate for an ADC is defined as the number of output samples available per unit time, and is specified as samples per second (SPS). Two aspects of sample rate that must be considered when selecting an ADC for a particular application are the minimum sample rate and maximum sample rate.

What is kilogram-meter per second?

kilogram-meter per second. Share this item with your network: The kilogram-meter per second (kg · m/s or kg · m · s -1 ) is the standard unit of momentum . Reduced to base units in the International System of Units ( SI ), a kilogram-meter per second is the equivalent of a newton-second (N · s), which is the SI unit of impulse .

What is the number of samples per second called?

The number sample per second is called the sampling rate, measured in samples per second. 2. ksps: Kilosample(s) per second (thousands of samples per second) 3. Msps: Megasamples per second (millions of samples per second) Also see:

## What is the sampling rate in data conversion?

In data conversion, an analog signal is converted to a stream of numbers, each representing the analog signal’s amplitude at a moment in time. Each number is called a “sample.” The number sample per second is called the sampling rate, measured in samples per second. 2. ksps: Kilosample (s) per second (thousands of samples per second)

## What does SPS mean in KSPS?

Glossary Definition for ksps. Glossary Term: ksps. Definition. 1. sps: Samples per second. In data conversion, an analog signal is converted to a stream of numbers, each representing the analog signal’s amplitude at a moment in time. Each number is called a “sample.”.