What is roughcast NZ?

Roughcast, or stucco, was initially a decorative plaster finish for brick and concrete wall construction but became a popular surface finish for timber-frame buildings as it appeared to have the solidity of masonry.

Is roughcast a leaky home?

The houses are classified as “roughcast” by the council but Relab spokesman Bill Ma said it was important to stress that they were not necessarily leaky. The facades are cracking at St Lukes Garden apartments.

Which cladding type has a higher risk of leaking?

A leaky building is one where moisture gets between the outside of the house (the cladding) and the inside walls. Buildings that have a high risk of leaking were mostly built between the late 1980s and the mid-2000s, using plaster-style monolithic cladding systems.

Are all plaster homes leaky?

The common (unfortunate) misconception is that all plaster homes leak because of the cladding. However, the fact is that there are plaster homes, and there are plaster homes. In fact, whether a home leaks or not is not only because of the cladding – weatherboard homes also leak.

What is roughcast including stucco?

Roughcast or pebbledash is a coarse plaster surface used on outside walls that consists of lime and sometimes cement mixed with sand, small gravel and often pebbles or shells.

What is the best exterior cladding?

Exterior Wall Cladding Ideas: 10 Best House Cladding Options

• Brick Wall Cladding: Steel Backed Brick Company.
• Timber Clad Houses and Wall Cladding: Boral.
• Lightweight Brick Finish Cladding: Corium.
• Fibre Cement Wall Cladding: Scyon.
• Aluminium Architectural Cladding: Alumate.
• Hardwood Fibreboard Cladding: Weathertex.

What year were leaky homes built in NZ?

The leaky homes crisis is an ongoing construction and legal crisis in New Zealand concerning timber-framed homes built from 1988 to 2004 that were not fully weather-tight. The problems often include the decay of timber framing which, in extreme cases, have made buildings structurally unsound.

Should I buying a house with moisture issues?

There are a lot of homes out there with mold and moisture intrusion issues, and if the issues are addressed properly you can be confident that you are buying a safe home that will retain its value. This should be done by a mold inspection and testing professional.

What years were leaky homes built in NZ?

What do leaky homes look like NZ?

The most likely signs are cracks in the plaster on the outside wall, internal cracks in the gib board, an unusual odour in the house, and unexplained damp areas.

How much does it cost to reclad a plaster house NZ?

Reclad cost estimates Remedial Design is usually between $5,000 – $10,000. Building Consents cost around $4,000 – $6,000.

What does roughcast look like?

Roughcast is a type of plaster that has many inclusions — including sand, gravel, pebbles and shell fragments — but the main components of the plaster are lime and cement. This type of plaster is coarse and pebbly in appearance, lending it the alternate name of pebbledash, but it is applied flat to a surface.

What type of cladding is used in NZ?

Stucco is the oldest type of monolithic cladding that has been used in New Zealand since the 1920’s. Texture coated fibre cement has been used since the 1970’s and Polystyrene is the most recently used since the 1980’s.

What is a roughcast concrete wall?

Muros Roughcast Concrete panels provide a raw ‘industrial’ weathered concrete form-work finish for any interior wall or ceiling space. The faux concrete replicates the real authentic imperfections of a poured concrete wall: complete with cracks, wide timber form lines, patches, air-pockets and stony aggregate seams.

What type of cladding does your house have?

What Type of Cladding Does Your Home Have? There are a range of different types of cladding that houses are built with, it can sometimes be hard to know which type of cladding your house has. One type of cladding is brick veneer which is installed in front of but separated from the standard timber framing.

What to look for when buying a house with roughcast?

Any help on this matter will be greatly appreciated. find out what’s underneath the roughcast. real concrete/brick or plasterboard. if plasterboard then this is more susceptible to leaky home. Agents shy away from using the term “plaster” obviously because of the negative connotations.