What is a foundation push pier?

A Push Pier is a steel pipe utilized in foundation repair that is hydraulically driven into competent, load-bearing soil and anchored to a foundation’s manicured footing via a remedial bracket to secure, stabilize and/or lift the structure.

How long do push piers last?

Push pier manufacturers recommend that their installation should be warrantied for a minimum of 10 years.

Are push piers effective?

Push piers are also advantageous when repairing a heavy building’s foundation. The heavier structure works well with this system because the piers are “pushed” into the ground using the building’s weight. Two-story homes, brick structures, and commercial buildings provide the needed resistance mass.

Are push piers better than helical piers?

Push piers are appropriate for large or heavy buildings, such as a commercial building with a reinforced poured concrete footing and a poured concrete foundation wall. Helical piers are a better choice for structures that aren’t as heavy.

What is the difference between push piers and helical piers?

The primary difference between Push Piers and Helical Piers is their installation method. Push Piers are quite literally pushed deep into the earth by the hydraulic press. Some homes are too light to use this method, which is where helical piers can come into play. …

What is the difference between piers and pilings?

While piers are typically constructed in place, pilings are fabricated off-site. Additionally, piers can be made from wood, brick, or concrete, while pilings are only made from concrete and steel. Pilings are available in several different configurations.

How far apart should push piers be installed?

Push piers are designed to lift your foundation back to its proper alignment. The process is repeated as additional piers are placed roughly 5 to 7 feet apart in the affected area. Using multiple piers allows the weight of the structure to be evenly distributed.

How deep do foundation piers need to be?

8 inches
Thickness. The minimum thickness for a pier is 8 inches. The minimum thickness for pier footings is 8 inches or 1-1/2 times the length of the footing projection from the pier, whichever is greater.

How far apart should push piers be?

Are push piers cheaper than helical piers?

Pricing is another significant difference between Push Piers and Helical Piers. The average general contracting cost per Push Pier in Southern California and Arizona ranges from $2,100 to $2,500. The average general contracting cost per Helical Pier in Southern California and Arizona ranges from $2,100 to $3,000.

What do pilings look like?

Concrete pilings are the most commonly used and are cylindrical in shape. Steel pilings are also fairly common but can be cylindrical, square, or H- and X-shaped. Hollow pilings are sometimes filled with concrete to enhance their strength, but can also be used independently.