What does E3 f6 mean on a Whirlpool dryer?

What does E3 f6 mean on a Whirlpool dryer?

An “F6E3” code in the display indicates an error that will require a dryer reboot. Unplug the dryer for five (5) minutes. Plug the dryer back in. Verify dryer operation.

What does F3 E3 mean on a Whirlpool dryer?

Exhaust thermistor failure
F3E1 – Exhaust thermistor failure. Check the harness from the thermistor to the control. F3E3 – Inlet thermistor failure. Always check the harness at the thermistor and the thermistor itself.

How do I fix E3 error on Whirlpool washer?

This error is most times caused by faulty wiring or loose connectors at one the boards. It can also be caused by either board having failed. Check the wiring and connections between the two and if that checks out ok, unplug the washer for a few minutes and restore power to reset the electronic controls.

What does F5 E3 mean on a Whirlpool washer?

The F5 E3 alert indicates there is issue with the lid lock. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.

Why does my dryer say F3?

Was a small load being dried? Very small loads or single items may not make contact with the moisture sensors causing this error to occur. Try drying larger loads or use an “Automatic” cycle verse a “Timed Dry” cycle.

What does F3 mean on dryer?

F3 E1 or F3 E2. Outlet thermistor failure. Check/ Repair. Unplug the dryer and check the outlet thermistor wiring.

What does F3 mean on Whirlpool?

The F3 error code on most Whirlpool ranges indicates that you have a problem with the oven temperature sensor probe. You will normally need to. unplug the range. and replace the oven temperature sensor probe to fix this type of problem.

What does F3 mean on your Whirlpool oven?

A Whirlpool Oven displays a F3-E2 error code when a Oven Overheating Error has been detected by the internal electronic diagnostics. The temperature of the oven is higher than 650 ̊F (343 ̊c) while oven is on and not in self-cleaning mode.

What does F3 mean on my Whirlpool washer?

A Whirlpool Washer displays a F3 E2 error code when a Water Temperature Error has been detected by the internal electronic diagnostics. Abnormal water temperature is sensed on the initial water supply.

What is F3 error code?

Function. When “F3” error code flashes,a small part known as the oven temperature sensor has encountered an error and fails to work anymore.

  • Prevention/Solution. A new oven sensor needs to be purchased.
  • Considerations. Check the current warranty on your oven.
  • Installation.
  • Types.
  • What are the error codes for a whirlpool washer?

    A: Error codes for a washing machine, such as the Whirlpool Duet front loading automatic unit, can contain a F followed by two digits like F07, F09 and F10.