What does C mean on Lorex camera?

A: Hello, The DVR can be set up for continuous recording, and an indicator symbol will be displayed next to a “C” on each of the channels to indicate that they are recording. Thanks, Lorex.

What does H mean on Lorex camera?

If you see a red “H” icon on the DVR screen, then there is an issue with the Hard Drive ( HDD ). There is no HDD in the DVR. The hard drive Needs to be formatted. The DVR is not properly detecting the HDD. The HDD is malfunctioning.

How do I view my Lorex recordings?

To view playback recordings using the Lorex Secure / FLIR Secure app:

1. Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
2. On the Home screen, tap your camera to stream live video.
3. Tap the History icon ( ) to display all recorded events.
4. Scroll up / down to browse through all events.

What does the M mean on Lorex?

motion
The M means motion. it will have a green mark where motion took place so u can just fast forward to them instead of watching the entire yard motionless.

How do I adjust my Lorex camera?

To adjust image settings:

1. Right-click on the channel you would like to configure and select Camera Setting. Enter the system password if prompted.
2. Configure the following settings as needed: Note. The settings listed below are only shown if they are supported on the selected camera.
3. Click OK to save changes. Note.

How do I know if my Lorex is connected to the Internet?

To check your router port connections: To power cycle your DVR / NVR, please power it off and disconnect the power source for approximately 30 seconds. Reconnect, and power back on. If applicable to your system, look for a solid green light or flashing yellow light on the LAN port indicating connection.

What does a red H mean?

If you see a red “H” icon on the DVR screen, then there is an issue with the Hard Drive ( HDD ). That red H is like the “Check Engine” light for the HDD, that something somehow is wrong with the HDD. The HDD is malfunctioning. The DVR may need a software update so that it can successfully communicate with the HDD.

How do I watch videos on my Lorex DVR?

To view recorded video:

1. Launch the Lorex ECO Stratus app on your smartphone or tablet.
2. Tap Remote Playback.
3. Select a date you want to view, then tap Select Channel. REMINDER: A small dot ( . )
4. Tap the channel you would like to view to open the Remote Playback screen.

How do I get videos off my Lorex DVR?

To download recorded video to your PC / Mac:

1. Launch the Lorex ECO Stratus Client software on your PC / Mac.
2. Click the Playback tab.
3. Click the channel you want to download from and click the Download Content icon ( ).
4. Select the files you want to download and click Start Download.