What do I do if my Canon printer ink absorber is full?

What do I do if my Canon printer ink absorber is full?

When the message “Ink absorber full.” is displayed, the printer stops printing and needs ink absorber replacement. Push the power button to turn OFF the printer, and then contact the service center for replacement. Request either Canon or the dealer you purchased the machine for a repair service.

How do you empty a waste ink absorber?

  1. Take a bowl with warm water and add some soapy material.
  2. Open the ink cartridge compartment.
  3. wait for ink cartridges and disconnect the printers power cord.
  4. Look balck rubber frame under the ink cartridge.
  5. pull the rubber frame out of the printer and remove ink absorber pads.
  6. clean the pads in the bowl.

What happens if ink absorber is full?

The error “Ink Absorber Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.

What does it mean when your printer says ink absorber is almost full?

The message Ink Absorber Full is an indication that the machines internal ink absorbers are almost full. These ink absorbers are used to hold ink after it has been purged from the print head during the print head cleaning cycles. In order to clear this message the ink absorbers inside the machine must be replaced.

What does it mean when printer Says ink absorber is full?

What does it mean when my printer says the ink absorber is almost full?

Can I replace the ink absorber?

In order to maintain the best printing, the ink used when Cleaning is absorbed into the ink absorber inside the printer. The ink absorber requires the replacement when it is full. However, it cannot be replaced by yourself.

Where is the ink absorber on a Canon printer?

Locate the waste ink absorbers in their black rubber frame. They will likely be on the right side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode.

What is the ink absorber on a printer?

The ink absorber is a small tank with a sponge that catches the ink that drips after a print job completes. Eventually the ink absorber will become full and the printer displays a warning. The printer will soon stop printing if the condition is not fixed.

How do I fix ink absorber full error on my printer?

Reinstall the frame in the printer. Press and hold the “Power” button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the “Power” button again. This resets the printer’s internal memory and overrides the “Ink Absorber Full” error code.

Where is the ink absorbing pad located on a Canon printer?

Depending on your Canon printer model, this compartment may be in the front or the back of the machine. Wait for the ink cartridges to move all the way over, then disconnect the printer’s power cord. Look for a black rubber frame under the ink cartridge assembly. This contains the ink absorbing pads.

How do I Clean my Canon printer ink absorber?

You can clean the ink absorber yourself by completing the following steps: Fill a large bowl with warm, soapy water and set it aside. Put on the rubber gloves. Open the ink cartridge compartment. Depending on your Canon printer model, this compartment may be in the front or the back of the machine.