Is Stix primer toxic?

May cause irritation of respiratory tract. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea.

Is bonding primer toxic?

Inhalation May cause irritation of respiratory tract. Ingestion Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. Repeated contact may cause allergic reactions in very susceptible persons.

Is Insl-x water based?

INSL-X® Primers. Interior and exterior primers to meet a variety of needs. From multi-purpose water and solvent-based primers to superior stain suppressing primers, INSL-X® is known for quality everyday and specialty primers.

Is Insl-X primer oil based?

…a multi-purpose, 100% acrylic, water-based primer sealer that provides outstanding everyday stain blocking on a variety of surfaces.

Should you sand before using Stix primer?

Glossy Surfaces – Although Stix® is formulated to be applied to hard to coat surfaces without the need for sanding, it is recommended that proper surface preparation still be completed to enhance adhesion properties.

Is Stix a good primer?

Stix is also ideal for use on plaster, drywall, wood, and nonferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. Stix is a low VOC primer, which levels to a smooth surface and cleans up with soap and water. We think Stix is the best bonding primer you can buy.

Who makes Insl primer?

Benjamin Moore
INSL-X Stix Primer is a primer made by INSL-X and owned by Benjamin Moore. INSL-X has been around for over 70 years and has become increasingly popular since being purchased by Benjamin Moore in 2008.

How many coats of Stix primer should I use?

two coats
Stix creates an extremely hard finish that can be topcoated with many products. After thoroughly cleaning and abrading the doors and drawer fronts, we apply a minimum of two coats of Stix, hand sanding between each coat, followed by a minimum of two topcoats of pigmented (tinted) catalyzed lacquer.

How long should Stix primer dry before painting?

approximately 3 to 4 days
Once applied, allow Stix® to cure for approximately 3 to 4 days to achieve maximum resistance to scrape off. However, Stix® may be topcoated with a quality latex or oil-based finish within 3 to 4 hours, depending on overall drying conditions.

Do you have to sand after using Stix primer?

Is Stix A good exterior primer?

With Stix® Waterborne Bonding Primer from Insl-x®, you can successfully apply paint to almost any interior or exterior surface. Stix is a low VOC primer, which levels to a smooth surface and cleans up with soap and water. We think Stix is the best bonding primer you can buy.

Is Stix oil based?

However, Stix® may be top-coated with a quality latex or oil-based finish within 1 to 2 hours, depending on overall drying conditions.

What is INSL-X primer used for?

INSL-X Primers From multi-purpose primers to job-specific ones, INSL-X has the primers professionals count on. A pro favorite, Stix ® Waterborne Bonding Primer, offers unparalleled adhesion to the most challenging “hard-to-coat” surfaces like glossy tile, PVC, vinyl, plastic, galvanized metals and many more.

Why choose INSL-X for athletic coating?

From tennis court paint to field marking paint, INSL-X has a line of athletic coatings that are as strong as the players they serve. Facility managers count on INSL-X’s robust athletic coating line for long-lasting surfaces that don’t quit.

What is Stix waterborne bonding primer?

A pro favorite, Stix ® Waterborne Bonding Primer, offers unparalleled adhesion to the most challenging “hard-to-coat” surfaces like glossy tile, PVC, vinyl, plastic, galvanized metals and many more.

What is infinsl-X®?

INSL-X® offers a full slate of problem-solving solutions, from ceiling paint designed to help prevent missed spots, to fire retardant paint, to waterproofing coatings and rust-preventative spray paints . For refurbishing kitchen or bathroom cabinets, Cabinet Coat is a go-to for painting contractors.