IS 335 motion?

The IS335 motion detector provides superior protection against false alarms without sacrificing catch performance. Installers can turn pet immunity on or off simply by setting a jumper. When pet immunity is enabled, the detector can distinguish between signals caused by humans while ignoring pets up to 80 lbs.

How do I take the sensor off my Comcast door?

On the Categories screen, tap Sensors & Zones. On the Sensors & Zones screen, tap Delete Sensor. Enter the Premise Passphrase and tap Done. Tap the sensor you want to delete, then tap Yes to confirm.

How do I remove a wired sensor?

Complete the following steps to remove a wired recessed sensor:

1. Pull out the sensor and its magnet. Pull out both the sensor and its magnet from their respective holes.
2. Disconnect the wire. At the sensor, disconnect the wire from the back of it.
3. Pull out the wire.
4. Complete the removal.

How do you reset a door sensor?

instructions:

1. Take off the Sensor’s cover and remove battery.
2. Touch the Sensor’s body with a magnet.
3. Insert the battery.
4. Within 2 seconds remove the magnet from the Sensor’s body, the LED will turn off.
5. Remove the battery.
6. Re-install the battery.
7. Reset will be confirmed by LED blinking.

How do I remove an old alarm system?

Here are a series of tips that will guide you through the process of removing an older security system:

1. Contact the alarm company.
2. Disconnect the sirens.
3. Pull off control panels.
4. Remove old battery packs.
5. Remove other components.
6. What to do with the wiring.
7. Contact Brinks Home Security®