How does the Klein ET310 work?

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected. The Transmitter also features a GFCI outlet tester.

What does a Digital Circuit Breaker Finder do?

A circuit breaker finder works by using a receiver that communicates with a transmitter. The receiver plugs into an outlet and sends a signal through the wire to the breaker box. By identifying that frequency, the circuit breaker finder can locate the correct breaker for the outlet, switch, or receptacle.

How do you use a breaker tracer?

Hold the receiver so the sensor tip is at a right angle and directly on the face of a circuit breaker. Slowly move the receiver up and down over the rows of circuit breakers while continually lowering the receiver’s sensitivity until only one breaker or fuse causes the receiver to beep.

How do you use a circuit breaker tracer?

How to Use a Circuit Breaker Finder

1. Install the Battery. The receiver on circuit breaker finders is powered by a battery—often a 9-volt battery installed in the handle.
2. Test the Receiver and Transmitter.
3. Match the Circuit to Its Breaker.
4. Using a Circuit Breaker Finder With a Light Fixture.

Will a circuit breaker finder work without electricity?

A breaker finder typically only works on energized circuits. The transmitter plugs into an outlet and draws spikes of current off of the line—typically anywhere from 6-10 amps.

What is the Klein Tools et310 circuit breaker finder?

The Klein Tools ET310 Circuit Breaker Finder with Integrated GFCI Outlet Tester is a digital circuit breaker finder used to locate the correct circuit breaker in a panel to which an electrical outlet or fixture is connected.

How far can a Klein cable tracer transmit?

Klein Tools VDV500-820 Cable Tracer Featuring a professional-grade tone generator and tracing probe for non-active wiring, the Klein Tools VDV500-820 Cable Tracer can transmit signals to as far as 1000 feet with five distinct tone rhythms.

What is the best circuit breaker tracer to buy?

Klein Tools – has a high reputation in telecommunications and ideally the best circuit breaker tracer. Zircon Electrical Tools – famous for manufacturing unmatched stud finders, metal detectors, and electrical scanners. Triplett – known for accuracy and stability of their tracers.

How does the ideal circuit tracer work?

This voltage tracer operates with both energized and de-energized circuits. To erase the hassle of flipping breakers, the Ideal circuit tracer comes with four sensitivity modes with its receiver. The High gauge helps me identify the accurate panel and the Breaker mode or the low mode aids in picking the single right breaker.