# How do you convert GPS coordinates to decimal degrees?

## How do you convert GPS coordinates to decimal degrees?

Decimal degrees = Degrees + (Minutes/60) + (Seconds/3600)

1. First, convert minutes and seconds to their degree equivalents and add the results. 25’/60 = 0.4167° 30″/3600 = .0083°
2. Then, add this number to the number of degrees. 39° + 0.425° = 39.425°
3. So, the final result is: 39° 25′ 30″ = 39.425°

How do you convert UTM Lat to long?

How to transform UTM to LAT LONG using Transformation

1. Select input / output spatial references.
2. Input coordinates using decimal format.
3. Click on the ‘Transform’ button to get the result.
4. Your coordinates will be converted using the output spatial reference.

How do you calculate UTM coordinates?

Here’s How:

1. UTM zones are all 6 degrees wide and increase from west to east starting at the -180 degree mark.
2. Calculate the eastern boundary of any UTM zone by multiplying the zone number by 6 and subtracting 180.
3. Subtract 6 degrees to obtain the western boundary.

### Is latitude from north to south?

While lines of latitude run across a map east-west, the latitude indicates the north-south position of a point on earth. Lines of latitude start at 0 degrees at the equator and end at 90 degrees at the North and South Poles (for a total to 180 degrees of latitude).

What is UTM grid system?

The Universal Transverse Mercator (UTM) is a map projection system for assigning coordinates to locations on the surface of the Earth. Like the traditional method of latitude and longitude, it is a horizontal position representation, which means it ignores altitude and treats the earth as a perfect ellipsoid.

How do I convert WGS84 to UTM?

How to transform WGS84 to UTM using Transformation

1. Select input / output spatial references.
2. Input coordinates using decimal format.
3. Click on the ‘Transform’ button to get the result.
4. Your coordinates will be converted using the output spatial reference.

#### How do you convert decimal degrees to degrees minutes seconds?

How to Convert Decimal Degrees to DMS

1. For the degrees use the whole number part of the decimal.
2. For the minutes multiply the remaining decimal by 60. Use the whole number part of the answer as minutes.
3. For the seconds multiply the new remaining decimal by 60.

What is UTM Northing and Easting?

The UTM (Universal Transverse Mercator) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. Within each zone, coordinates are measured as northings and eastings in meters. The northing values are measured from zero at the equator in a northerly direction.

What is Zone UTM?

The UTM (Universal Transverse Mercator) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 19, which includes Maine.

## What distance is 1 degree of latitude?

69 miles
One degree of latitude equals approximately 364,000 feet (69 miles), one minute equals 6,068 feet (1.15 miles), and one-second equals 101 feet. One-degree of longitude equals 288,200 feet (54.6 miles), one minute equals 4,800 feet (0.91 mile), and one second equals 80 feet.

What is the 90 degree south line of latitude?

South Pole
The latitude of the North Pole is 90 degrees N, and the latitude of the South Pole is 90 degrees S.