How do I turn off bypass tray Xerox?

Remove the Bypass Tray From the Printer

1. At the printer control panel, press the Home button.
2. Touch Device > Paper Trays.
3. In the Paper Trays menu, select the bypass tray icon. To select a paper or envelope size, touch the current size setting, then select a size.
4. To save the settings, touch OK.

How do you override paper size mismatch Xerox?

Cancel the current print job on the printer a. Choose “Job reset” and “current job” from the printer display menu to cancel the current print job and clear the “paper size mismatch” error.

How do you resolve error job held for resources?

Try the following:

1. Step 1: Release a Held for Resources Job From the Active Jobs Screen. Jobs can be held or paused for various reasons.
2. Step 2: Make Sure the Tray Being Used for the Job is Configured With the Correct Paper Size and Type.
3. Step 3: Make Sure the Paper Type and Size is Set Correctly in the Print Driver.

Why won’t my printer print from the bypass tray?

The Tray 5 (Bypass Tray) needs to have the same paper the document selected loaded in it. As well you must select Tray 5 (Bypass Tray) from Printer Properties and also in Page Setup. Ensure Correct Paper is loaded in Tray 5 (Bypass Tray).

What is Xerox admin password?

1111
NOTE: The default user ID is “admin” (case sensitive). The default passcode is “1111”. Contact your System Administrator if there is a problem with the password, or the password has been lost or forgotten. If the password cannot be recovered, contact Support to place a service call.

What is a bypass tray Xerox?

The bypass tray is intended primarily for small-quantity jobs using special media. The bypass tray is on the left side of the printer. A tray extension is provided to accommodate larger paper. After loading paper in the bypass tray, ensure that the tray settings on the touch screen match the paper size and type loaded.

How do I fix paper mismatch error?

How to Troubleshoot a Paper Size Mismatch Error

1. Open the printing application, click File, click Print, and then click Printing Preferences.
2. Verify the Paper Size drop-down is set to the correct size.
3. Click the Paper Tray tab, and then click the Paper Source drop-down and select the paper tray to be printed from.

Why does my printer say paper mismatch?

The “Paper Mismatch” or “Paper Size Mismatch” error can occur when the paper, envelopes or other media loaded in the printer tray or feeder is a different size than the paper selected in the printer settings and is a safeguard programed into your printer to prevent ink or toner from being wasted.

What does held for resources mean on a Xerox printer?

Most held for resources messages mean that the paper loaded in the machine is either not right for the job you have submitted, or the paper trays have not been setup properly. Both issues have easy fixes and you can be back to printing in no time if you know what to do.

How do I clear the memory on my Xerox printer?

To clear device memory:

1. On the printer Control Panel, press the Menu button. NOTE: To navigate through the menu, use the Up or Down arrow buttons.
2. Navigate to Admin Settings, then press OK.
3. Navigate to Service Tools, then press OK.
4. Navigate to Clear Device Memory, then press OK.
5. At the Are you sure?

Where is the bypass tray on a Xerox printer?

Open the Bypass Tray, located on the left side of the printer, by rotating it outward.

What does error code 07-500 mean in Xerox printer?

The bypass tray is always looking for paper and when a user is printing something, he gets error message: Xerox Device Status. 07-500 The paper supply in the Bypass Tray is empty. User intervention is required to add paper to the Bypass Tray.

What does error code 07-500 mean in bypass tray?

The bypass tray is always looking for paper and when a user is printing something, he gets error message: 07-500 The paper supply in the Bypass Tray is empty. User intervention is required to add paper to the Bypass Tray.

What is device status 07-500?

Xerox Device Status 07-500 The paper supply in the Bypass Tray is empty. User intervention is required to add paper to the Bypass Tray. Printing can continue if the required media is available from other trays, all other machine services(if installed) are unaffected.

How do I fix the print error in Windows 10?

Go to Start -> Devices and Printers -> Printer Preferences -> Advanced -> Printing Defaults. Please remember to select “Accept as Solution” for posts that helped you solve the issue. 05-12-2015 04:07 PM Actually the problem is not really the Tray. The print gave this message. Mismatch of paper properties. Place the correct support.