How do I reset my HP Officejet 100 printer?

How do I reset my HP Officejet 100 printer?

Step one: Reset the printer

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet.
  3. Wait at least 15 seconds.
  4. Plug the power cord back into the wall outlet.
  5. Reconnect the power cord to the printer.
  6. Turn the printer on.

How do I clean the printhead on my HP Officejet 100 Mobile Printer?

Click the Windows icon ( ), click All Programs, click HP, click HP Officejet 100 (L411) Mobile Printer Series, and then click Toolbox. The Toolbox opens. Click the Services tab. Click Clean the Print Cartridges, and then follow the on-screen instructions to clean the cartridges.

Why is my Officejet not printing?

You need to ensure your HP printer has enough paper, ink, or toner, and it is not stuck on paper jam. Also, check the status of your printer cartridge and try replacing it with a new one if it is not good enough. In some cases, your HP printer stops printing after you replace its parts.

What is the Bluetooth code for HP Officejet 100 Mobile Printer?

000000
The default code would be 000000 (six zeroes). If that’s fails to connect follow these steps to print a Bluetooth Configuration page: https://support.hp.com/us-en/product/hp-officejet-100-mobile-printer-series-l411/4231339/model/42314…

How do I make my HP Officejet 100 Mobile discoverable?

HP Officejet 100 Mobile Printers (L411a and L411b) – Printing a Bluetooth Configuration Page

  1. Load plain white paper into the tray.
  2. On the product control panel, press and hold the Bluetooth button ( ) for three seconds. The Bluetooth configuration page prints.

How do I change the ink cartridge on my HP Officejet 100 printer?

Lift the cartridge latch, and then gently remove the cartridge from the carriage. Remove the new cartridge from its package, and then pull the pink tab to remove the protective tape. caution: Do not touch the copper contacts on the back of the cartridge or the ink nozzles on the bottom of the cartridge.

How do you clean an ink service module?

After removing the module, soak it in a hot soapy water solution (I used Dawn dishwashing soap) for about an hour in a small disposable plastic container. Rinse out the module and soak it again in a fresh solution of soap and water. Keep repeating these steps until the module rinses clean.

How do I fix my printer not responding?

How do I fix my printer, not responding? (Windows)

  1. Make your printer the default option. Click on the Start button and then go to Settings > Devices > Printers & scanners.
  2. Clear Print queue.
  3. Restart Print Spooler Service.
  4. Re-Add your printer to your PC.
  5. Restart your Windows PC.

What is wrong with my HP printer?

Among the most common problems with any make of printer are paper jams. A printer will jam for any number of reasons: It’s dirty, the wrong paper type is being used, or the rollers on the printer that feed the paper through its pathway are worn down. Certain HP printers are more susceptible to paper jams than others.

Why wont my HP wireless printer connect?

On your Windows computer, open Printers & Scanners and delete the printer. Open the HP Smart app, and sign in. Prepare the printer by resetting the network settings to the default. On printers with a touchscreen printer, select Restore Network Defaults from the Wireless Settings or Restore Settings menu.

How do I connect my HP Officejet 100 to Bluetooth?

How do I clean the print cartridges on my HP OfficeJet 100?

Click the Windows icon ( ), click Programs, click HP, click HP Officejet 100 (L411) Mobile Printer Series, and then click Toolbox. The Toolbox opens. Click the Services tab. Click Clean the Print Cartridges, and then follow the on-screen instructions to clean the cartridges.

How do I Pair my OfficeJet 100 mobile with my printer?

It will start searching for your Bluetooth devices and you will see your OfficeJet 100 Mobile populate in the list, please click Pair (Note* The printer usually pops up with a code name not the actual name of the printer, that is ok) You will see a box pop up requiring a code, put in 0000 (4 zeros) if that fails try 000000 (6 zeros) then click Pair

How do I open the HP OfficeJet 100 (l411) mobile printer toolbox?

Click the Windows icon ( ), click All Programs, click HP, click HP Officejet 100 (L411) Mobile Printer Series, and then click Toolbox. The Toolbox opens.

How do I align print cartridges on my HP OfficeJet 100?

Select your operating system, and then follow the instructions to align the cartridges. Click Start ( ), click All Programs, click HP, click HP Officejet 100 (L411) Mobile Printer Series, and then click Toolbox. The Toolbox opens. Click the Services tab, and then click Align the Print Cartridges.