How do I log into a Linksys router by default?

The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

What is the default password of Linksys router?

admin
The default password for Linksys routers is admin. For optimum security, it is recommended to change this password during setup.

How do I find my Linksys router username and password?

Checking the Linksys Wi-Fi Router’s name and Password

1. Launch Linksys Connect on the computer that was used to set up the Linksys Wi-Fi Router.
2. On the Linksys Connect main screen, select Router settings.
3. The Router name and Password are found under the Personalize section.
4. Launch a web browser like Internet Explorer.

How do I access my Linksys router?

Open your Internet browser, type “192.168. 1.1” in the address bar and press “Enter.” If you previously changed the Linksys router’s IP address, enter the new IP address or locate it through the Command Prompt. Click “Start,” type “cmd” and press “Enter” to open the Command Prompt.

How do I find the IP address of my Linksys router?

1. Click Network.
2. Click on Wi-Fi then click the Advanced… button.
3. Select TCP/IP. Your router’s local IP address should be displayed in the Router field. In the example below, the local IP address of the router is 10.150. 104.80.

Where is the Linksys router IP address?

192.168.1.1
192.168. 1.1 is the standard IP address used by Linksys broadband routers, other brands of network routers, and home network gateway equipment. Network administrators use this address to set up a new router or update settings for an existing one.

What is my router’s password?

How to See Wi-Fi Password on Android. If you’re running Android 10 or higher, this is easily accessible under Settings > Network & Internet > Wi-Fi. Just select the network in question.

Which one is password on router?

To find the default password, find your Wi-Fi router and examine it. You should see a sticker somewhere on it that contains both the “SSID”–the wireless network name–and the password. If you haven’t changed the default password yet, you can use that password to connect to the router.

How do I Configure my Linksys router?

Insert the two-pronged AC adapter for the Linksys router into a wall outlet. Insert the other end into the “Power” jack on the back of the router. Wait until the “Power” light in front of the router is solidly lit and the ” WLAN ” light is flashing.

How to reset Linksys router to its default settings?

Find the reset button on the device. To reset your Linksys device,you’ll need to locate the reset button. The exact location of the button will vary between devices.

Reset the Linksys router to factory settings. Press the Reset button and hold it for at least 10 seconds.

Default login credentials

How to access a Linksys router?

Open a supported Web browser (Ex. Internet Explorer) and in the address bar enter the IP address of your Linksys router.

You will be prompted for the user name and password.

Next, click on the Status tab.

Can’t access my Linksys router?

– Scenario: When you are trying to access your router’s settings in Linksys Connect, you encounter the Cannot access your router message. – Manually connect to your wireless network. One of the reasons why you are unable to access the Router Settings using Linksys Connect is because your computer is connected to a – Update your Easy Setup Key. To update your Easy Setup Key, you will need to temporarily connect your computer to the router using an Ethernet cable. – Reset the router and re-install Linksys Connect on your main computer. – Related Articles: