How do I connect my subwoofer to my Sony receiver?
IMPORTANT: Connecting two subwoofers to a Sony® stereo receiver is not supported unless the stereo receiver has a second subwoofer output jack.
- Connect the first subwoofer to one of the subwoofer outputs on the stereo receiver.
- Connect the second subwoofer to the other subwoofer output on the stereo receiver.
Why isn’t my subwoofer connecting to my receiver?
Other things to check and make sure of are: The subwoofer output is enabled in the amplifier set-up menu. Connections are correct – subwoofer Pre-out (from the amplifier) to left line in on the subwoofer. The Auto switch on the back of the subwoofer is set to the ‘On’ or ‘Auto’ position.
Why does my Sony amp say protect?
If you’re wondering why “my Sony receiver is flashing protect,” it’s likely related to a short circuit or a power surge. Once the protect mode is activated, the speakers will not function until the threat is removed. The best first course of action is to simply turn everything off and wait while the system cools down.
How do I get my Sony home theater out of protected mode?
To isolate the problem, do the following: Turn off the home audio device, and remove all speaker wires from the back. Then turn the device back on and check if the issue is resolved. If it is still having the same issue, turn off the device again leave it off for at least 30 minutes before turning it on again.
How do I reset my Sony surround sound system?
Reset your Blu-ray Home theater system to factory settings
- On the supplied remote, press the HOME button.
- Use the left or right arrow buttons to select Settings.
- Use the up or down arrow buttons to select Resetting, then press. (Enter).
- Select Reset to Factory Default Settings and follow the on-screen instructions.
If by any chance you do not have an LFE port on the back of your subwoofer or even AV Receiver, you will have two RCA ports for Line-IN (Left and Right). If you have a Subwoofer-Out port on your AV receiver, and an LFE port on your subwoofer simply connect a subwoofer cable between each port (see Fig. A).
How do I connect my subwoofer to my stereo receiver?
Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.
How do I connect my passive subwoofer to my Sony receiver?
You can connect a passive subwoofer to an AV receiver by treating it as a loudspeaker and linking the subwoofer directly to your AV receiver via the speaker connectors. You can also power it with an external amplifier and treat it as a powered subwoofer that connects to the pre-out.
Why does my subwoofer not work?
Check to make sure that cables are firmly connected and plugged into the correct spots. Check outlets, power cable, and fuse. Most subwoofers have a “standby” LED that glows to indicate active power. If it’s not lit, check that the subwoofer is securely plugged into a wall socket, surge protector, or power strip.
How do I connect my Sony subwoofer to my speakers?
Link the soundbar and subwoofer.
- On the supplied remote control, press the AMP MENU button.
- Select WS.
- Press the Enter button.
- Select LINK or S.
- Press the Enter button.
- After START appears, press the Enter button to allow the soundbar to search for the subwoofer.
What cable do I need to connect my subwoofer to my receiver?
You will need either a receiver or a preamplifier and amplifier. Using a subwoofer cable (RCA cable), connect the subwoofer to the AV receiver by running the cable from the receiver’s subwoofer output to the subwoofer’s line input.
What is the difference between active and passive subwoofer?
The difference between passive and active subwoofers is that passive subwoofer depends on an external amplifier, while an active subwoofer contains a built-in amplifier. The passive subwoofer is usually smaller and less bulky than the active subwoofer, although it produces a less intense sound.
Why is my Sony subwoofer not working?
Try plugging the AC power cord into a different AC outlet to make sure there is not a problem with the current outlet. Make sure the POWER switch on the active subwoofer is set to on. Depending on your subwoofer, turn the POWER SAVE switch to the off position so the active subwoofer remains on at all times.
How many speakers does the Sony str-dh520 have?
The Sony STR-DH520 delivers high-impact excitement and realistic, wraparound sound for movies, TV shows, music, and video games at an economical price. It will drive up to seven home theater speakers for engaging surround sound with every entertainment source in your system.
Does the Sony str-dh520 use BRAVIA widget control?
Only certain Sony 2011 TV displays and newer can utilize the BRAVIA Widget Control feature. Although the STR-DH520 sips far less power than some of the more feature-rich AV receivers, 100 watts per channel can still affect the electric bill.
What do the buttons on the str-dh520 do?
The front of the STR-DH520 is pretty simple with the usual row of buttons of operating the standard functions of an AV receiver. There is a small input selector knob on the left and a larger master volume knob on the right side. The large info screen on the center shows things like the current input source.
What is Audio Return Channel on the ‘dh520?
Plus you’ll get cutting edge audio decoding while you watch your Blu-ray movies. The ‘DH520’s Audio Return Channel feature allows signals to be sent from your compatible HDTV’s tuner back to the receiver via HDMI, eliminating the need for extra cables. Don’t want to hear the weather report through all of your speakers?