Can you put a supercharger on a Ecotec?

Although both engines use the same block, adapting an M90 supercharger to an Ecotec motor is not as easy as it sounds, although it is possible and has been done before. We recommend doing a complete engine replacement as it is much easier, cheaper in the long run and less time consuming.

How much HP does a 2.2 Ecotec have?

A 2.2-liter V-4 Ecotec engine can put out 135 horsepower at 5,200 revolutions per minute. The engine produces 142 pound-feet of torque at 4,400 rpm.

How much HP does a Ecotec make?

In stock form—that is, in GM-produced cars—the Ecotec naturally aspirated engines can make between 140 hp at 5,600 rpm and 150 lb-ft of torque at 4,000 rpm for the 2.2L, up to 202 hp at 6,300 rpm and 191 lb-ft of torque at 4,400 rpm for the 2.5L version with direct injection in a late model Cadillac.

How much horsepower can you get out of a 2.4 Ecotec?

GM 2.4 Ecotec Engine Problems The GM 2.4L Ecotec engine made its debut in 2006 and remained through 2019 in the Polaris Slingshot. 2.4 Ecotec engines are found in many Chevy, Buick, Saturn, GM, and Pontiac models. The engine offers a respectable 164-182 horsepower given its small NA design.

What engine do you have for a supercharger kit?

What engine do you have? This is a complete kit to bolt on a supercharger kit for your FWD 2.2 or 2.4L Ecotec engine. Once you have the supercharger, intake manifold, and throttle body it comes with everything to install except the tools!

What does the bullet supercharger kit do?

Developed and manufactured in house by Bullet Cars utilising the Rotrex Supercharger, this kit will transform your standard V6 ECOTEC Commodore into a V8 beating machine! The power delivery from the Rotrex Supercharger is extremely smooth and feels like a factory installation.

Does the supercharger come with the throttle body and manifold?

Once you have the supercharger, intake manifold, and throttle body it comes with everything to install except the tools! Every piece of this kit is now brand new, no more used components are included. *As of 8/21/2020 we do not have used M62 superchargers or LSJ intake manifolds available for purchase.

Why buy a Rotrex supercharger kit?

Due to our massive buying power with Rotrex we can obtain any supercharger kit cheaper than the competition, and can then pass this discount on to you, our customer. Developed and manufactured in house by Bullet Cars utilising the Rotrex Supercharger, this kit will transform your standard V6 ECOTEC Commodore into a V8 beating machine!

Can you put a supercharger on a 3.8 V6?

One of the most common questions in the 3800 market is “Can I bolt a GTP supercharger onto my GT (L36) engine. The short answer is no. The only things the non supercharged and supercharged 3800’s have in common are the block and crank. Everything else is different.

How much horsepower does a V6 Ecotec have?

3.8 L 152 kW (204 hp) ECOTEC V6 (option of 171 kW (229 hp) Supercharged V6) 5-speed manual transmission (option of 4-speed automatic transmission) Air conditioning.

What happens if you supercharge a V6?

the supercharger stuffs more air into the combustion chamber. If the same amount of fuel is being put into the combustion chamber as was the case without the supercharger, your air fuel mixture will be too lean, which will damage the engine – likely burning a hole in a piston.

How much is it to supercharge a V6?

Expect to pay anywhere from $1500 to $7500 for an aftermarket supercharger kit. This will depend on the type of engine you have.

What supercharger is on a 3800?

M62 supercharger
The M62 supercharger was manufactured by Eaton, for the GM 3800 SI engine. HP was rated at 205 for 1991-1993 engines (Gen2 supercharger) with a 2.55-inch (65 mm) pulley, and 225 for 1994-1995 engines(Gen3 Supercharger).

How can I make my V6 Ecotec faster?

How to Get More Horsepower From a 3.8 V6

1. Increase the amount of air flowing into the engine. Air mixes with fuel in each engine cylinder to produce combustion, which in turn increases horsepower.
2. Increase the amount of fuel flowing into the engine.
3. Increase the amount of air flowing out of the engine.

Can you turbo an Ecotec?

The ECOTEC V6 turbo kit includes a custom made manifold and crossover pipe which are both fabricated from high temperature steam pipe. Utilising a Garrett GT3582 turbo. All intercooler piping, manifolds and the header tank are manufactured in-house at ASE.