How do you reset the drum on a Brother HL 4570CDW?

Brother HL-4570CDW – Reset Drum

1. Press the “+” key to find “Machine Info”.
2. Press “OK”.
3. Press the “+” key to find “Reset Parts Life”.
4. Press “OK”.
5. Press the “+” key to find “Drum Unit”.
6. Press “OK”.
7. Press the “+” key to reset the drum counter.

How do you reset the drum on a Brother printer HL L6200DW?

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L5200DWT/HL-L6200DW/HL-L6200DWT

1. Make sure the machine is turned on.
2. Open the front cover.
3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
4. Press for [Reset] to reset the drum counter.
5. Close the front cover of the machine.

How do you reset the drum on a HL l2380dw?

How to reset the drum counter:

1. Make sure the front cover is closed.
2. Press the “X” on the printer to display to interrupt the “replace drum” message.
3. Press the tool button (settings) > All Settings > Machine Info. >
4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do I reset the drum counter on my Kenmore dryer?

DO NOT reset the drum counter unless you are replacing the drum unit. Make sure the machine is turned on. Close the front cover. Press OK and the Up arrow key at the same time. Press OK to select Drum. Press the Down arrow key to reset the drum counter.

How do I replace the drum on my toner cartridge?

Unpack the new drum unit and remove the protective cover. Hold the handle of the toner cartridge and slide it into the appropriate colored section of the drum unit until it clicks into place. Make sure the green lock lever (1) is in the release position as shown in the illustration.

How do I unlock the toner cartridge on my brother dryer?

Turn the green lock lever (1) at the left of the machine counterclockwise to the release position. Holding the green handles of the drum unit, lift the front of the drum unit and remove it from the machine. Hold the handle of the toner cartridge and slightly push it to unlock.